Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Samsung specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 561-5298 Start a Repair
Error code · Washer

Samsung Washer Code SF / 5F / Sr: System Error

Samsung washers with a digital display, front-load and top-load, show SF, 5F, SF1 to SF3, or 1 SF for a system error, and Sr or 5r for a system relay error. The WD53DBA900H lists SF as…

High · stop use, call now
Start a Repair(713) 561-5298
Code
SF / 5F / Sr
Appliance
Washer
Brand
Samsung
Warranty
30-day workmanship

What SF / 5F / Sr means

Samsung washers with a digital display, front-load and top-load, show SF, 5F, SF1 to SF3, or 1 SF for a system error, and Sr or 5r for a system relay error. The WD53DBA900H lists SF as a micro controller operation failure. Both point to the main control rather than to water, drain, or the drum. The washer usually stops with the code showing and may not respond to buttons.

Common causes of SF / 5F / Sr

  • Main control board operation
  • Relay output on the main board
  • Power supply stability to the washer
  • Connections between the main board and its modules
✓ One safe check you can try

1. Let the washer sit switched off for two to three minutes. 2. Switch it on again and start the cycle over. 3. Check that the outlet is working and the plug is seated. 4. If SF, 5F, or Sr comes back, stop using the washer and schedule a visit.

! Why to stop there
  • A restart cannot show whether the control repeats the problem or hit a one-time glitch.
  • We check the board connections and power supply before any control is quoted.
  • We separate the relay case (Sr) from the system case (SF) when testing.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

Extra Large / Extra High / Large / High blinkingSamsung Washer Extra Large, Extra High, Large, or High Lights Blinking: Water Not Filling Hot & Cold / Hot & Eco WarmSamsung Washer Hot and Cold, or Hot and Eco Warm Lights Blinking: Motor Error Hot / Hot & Extra Large / Hot & Extra High / Hot & Large / Hot & HighSamsung Washer Hot, or Hot with a Level Light Lights Blinking: Door Not Locked Hot & Medium / Hot & MidSamsung Washer Hot and Medium, or Hot and Mid Lights Blinking: Heater Error Hot & Small / Hot & LowSamsung Washer Hot and Small, or Hot and Low Lights Blinking: Hoses Swapped Hot & Tap Cold / Hot & CoolSamsung Washer Hot and Tap Cold, or Hot and Cool Lights Blinking: MEMS Sensor Error Hot & WarmSamsung Washer Hot and Warm Lights Blinking: Unbalanced Load Self Clean LED blinkingSamsung Washer Self Clean Light Lights Blinking: Cleaning Reminder
SF / 5F / SrSF / 5F / Sr questions
What is the difference between SF and Sr?

SF and its variants are a system error, where the main controller did not operate correctly. Sr and 5r are a system relay error, which points to the relay output on the board.

Is 5F the same as SF?

Yes. The display can show the letter S as a 5, so 5F and SF mean the same system error. Either spelling points to the main control, so reading the whole code on the display helps us.

Will unplugging the washer help?

Turning it off for a few minutes may clear a one-time glitch. If the code returns, the control needs testing, and we price it in writing before replacing anything.

Book a visit

Still seeing SF / 5F / Sr?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 561-5298