Error code · Washer

Samsung Washer Extra Large, Extra High, Large, or High Lights Blinking: Water Not Filling

Medium · inspection needed

Code: Extra Large / Extra High / Large / High blinking
Appliance: Washer
Brand: Samsung
Warranty: 30-day workmanship

What Extra Large / Extra High / Large / High blinking means

On Samsung washers without a digital display, a blinking Extra Large, Extra High, Large, or High water level light is the pattern for a not-filling error. The control did not see the tub fill to the level it expected, and it stopped the cycle. This follows the meaning of the no-fill group on washers with a numeric display. The drum stays dry or low on water, and the light keeps blinking.

Common causes of Extra Large / Extra High / Large / High blinking

Water supply valves not fully open
Kinked or crushed inlet hose
Clogged inlet screen
Water level sensing

✓ One safe check you can try

1. Check that both water supply valves are fully open. 2. Look at the inlet hoses behind the washer for kinks. 3. Turn the washer off, wait a few minutes, then turn it on and restart the cycle. 4. If the light blinks again with the supply open, request service.

! Why to stop there

Open valves and clear hoses leave the inlet valve or the level reading as the cause.
We test the inlet valve and the level sensing.
We confirm the supply pressure at the washer.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

Cold / Eco WarmSamsung Washer Cold or Eco Warm Lights Blinking: Stuck Button Hot & Cold / Hot & Eco WarmSamsung Washer Hot and Cold, or Hot and Eco Warm Lights Blinking: Motor Error Hot / Hot & Extra Large / Hot & Extra High / Hot & Large / Hot & HighSamsung Washer Hot, or Hot with a Level Light Lights Blinking: Door Not Locked Hot & Medium / Hot & MidSamsung Washer Hot and Medium, or Hot and Mid Lights Blinking: Heater Error Hot & Small / Hot & LowSamsung Washer Hot and Small, or Hot and Low Lights Blinking: Hoses Swapped Hot & Tap Cold / Hot & CoolSamsung Washer Hot and Tap Cold, or Hot and Cool Lights Blinking: MEMS Sensor Error Hot & WarmSamsung Washer Hot and Warm Lights Blinking: Unbalanced Load Self Clean LED blinkingSamsung Washer Self Clean Light Lights Blinking: Cleaning Reminder

Extra Large / Extra High / Large / High blinkingExtra Large / Extra High / Large / High blinking questions

Which light blinks for no-fill?

The Extra Large, Extra High, Large, or High level light, depending on how your model labels it. Your manual or the panel markings show the exact names, but the meaning is the same.

Could my home water be off?

Yes. A closed valve or a water shutoff in the house gives the same result. Check the valves first. Check the valves first, and see whether other faucets in the house run normally.

Does it need a part?

Not always. Many cases are a kinked hose or a closed valve. If those are fine, we test the inlet valve and level reading. Telling us what you found helps us bring the right items.

Book a visit

Still seeing Extra Large / Extra High / Large / High blinking?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 561-5298