Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Samsung specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 561-5298 Start a Repair
Error code · Washer

Samsung Washer Code PC / PE: Clutch Position

Samsung top-load washers with a clutch show PC or PE for a clutch position error, and PC1 or PE1 for a clutch Hall signal error. The WA50F9A6DS is an example, with PE and PE1 in its…

Medium · inspection needed
Start a Repair(713) 561-5298
Code
PC / PE
Appliance
Washer
Brand
Samsung
Warranty
30-day workmanship

What PC / PE means

Samsung top-load washers with a clutch show PC or PE for a clutch position error, and PC1 or PE1 for a clutch Hall signal error. The WA50F9A6DS is an example, with PE and PE1 in its service table. The clutch switches the washer between agitating and spinning, and the control reads a position signal to know which mode it is in. When that reading is wrong, the cycle stops and the code appears.

Common causes of PC / PE

  • Clutch position reading
  • Clutch Hall signal and wiring
  • Clutch mechanism movement
  • Main board input for the clutch
✓ One safe check you can try

1. Power the washer down and wait a few minutes. 2. Power it back up and run the cycle again. 3. Remove part of the load, since a heavy load can strain the mechanism. 4. If PC or PE returns, schedule a visit and stop using the washer.

! Why to stop there
  • A restart cannot tell us whether the clutch moved correctly or the signal was lost.
  • We check the clutch wiring and test the position and Hall signals.
  • We separate PC and PE from PC1 and PE1 before choosing a test.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

Hot & Tap Cold / Hot & CoolSamsung Washer Hot and Tap Cold, or Hot and Cool Lights Blinking: MEMS Sensor Error Hot & WarmSamsung Washer Hot and Warm Lights Blinking: Unbalanced Load Self Clean LED blinkingSamsung Washer Self Clean Light Lights Blinking: Cleaning Reminder Small / LowSamsung Washer Small or Low Lights Blinking: No Drain Tap Cold / Cool / Medium / MidSamsung Washer Tap Cold, Cool, Medium, or Mid Lights Blinking: Overflow WarmSamsung Washer Warm Lights Blinking: Communication Error Cold / Eco WarmSamsung Washer Cold or Eco Warm Lights Blinking: Stuck Button Extra Large / Extra High / Large / High blinkingSamsung Washer Extra Large, Extra High, Large, or High Lights Blinking: Water Not Filling
PC / PEPC / PE questions
What is the clutch?

The clutch changes the washer between agitating and spinning. PC or PE means the control could not confirm which position it is in. It is a mechanical part of the drive, so a position reading problem can come from wiring as well.

What does the 1 in PC1 mean?

PC1 and PE1 are listed for a clutch Hall signal error, which is the signal that reports the clutch position. It points to the signal rather than the position itself.

Does a heavy load cause PC?

A heavy or lopsided load can strain the mechanism. Try a lighter load once, and if the code returns, the clutch circuit needs testing. We also check the clutch wiring before suggesting any mechanical repair.

Book a visit

Still seeing PC / PE?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 561-5298