Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Samsung specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 561-5298 Start a Repair
Model library · Samsung Range

NSI6DB930012

Samsung NSI6DB930012 Induction Range Repair

Most common issues on this model

  1. Door lock stuck after self-clean
  2. Display dark after outage
  3. Oven sensor reading off
  4. Induction zone not heating a pan
  5. Air Fry mode not reaching temperature

The NSI6DB930012 is a Bespoke 6.3 cubic-foot smart slide-in induction range in white glass, with an anti-scratch glass cooktop. It is all electric, so it runs on a 240-volt circuit, and installers usually place it flush with the counters where a gas line is not available.

On a range of this type, the induction cooktop and the oven are separate systems under one control. The cooktop depends on power boards and cooling fans below the glass, while the oven depends on elements, a sensor and a door lock motor for self-clean. A display that goes dark after a power interruption usually means we should check the control board and its supply first.

We test the lock, the oven heat, and each cooking zone with a pan that works on induction. We read the model and serial from the label before ordering a part, quote the price in writing, and give a 30-day workmanship warranty on the repair.

Key features

  • Bespoke 6.3 cu. ft. smart slide-in induction range
  • Anti-scratch glass cooktop
  • White glass finish
  • Air Fry mode
  • SmartThings Wi-Fi remote preheat
NSI6DB930012NSI6DB930012 questions
My induction range display went dark after a power outage. What now?

We check the incoming voltage at the range, then the control board and its connection to the display. A surge can affect the board, so we test before we recommend a replacement.

Do induction zones work with any pan?

Induction needs a magnetic pan base. If a zone will not heat, we first test with a pan that is known to work, then check the zone's coil and power board.

The oven door will not unlock after cleaning. Can you fix it?

Yes. We test the lock motor and switch and confirm the oven has cooled. If the lock is worn, we quote its replacement before opening the range.

Book a visit

Book repair for your NSI6DB930012

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.