Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Samsung specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 561-5298 Start a Repair
Error code · Washer

Samsung Washer Code AC6 / AE6: Inverter Board Link

On Samsung WF45-series front-load washers, AC6 or AE6 means the inverter board, which drives the motor, has stopped communicating with the main control board. Models that use this table include the WF45M5500A and WF455ARGSGR/A2. The WD53…

High · stop use, call now
Start a Repair(713) 561-5298
Code
AC6 / AE6
Appliance
Washer
Brand
Samsung
Warranty
30-day workmanship

What AC6 / AE6 means

On Samsung WF45-series front-load washers, AC6 or AE6 means the inverter board, which drives the motor, has stopped communicating with the main control board. Models that use this table include the WF45M5500A and WF455ARGSGR/A2. The WD53 combo words the same code as a connection problem between the main board and the inverter. The drum will not turn, and the cycle stops with the code on the display.

Common causes of AC6 / AE6

  • Harness between the main board and the inverter board
  • Inverter board connectors
  • Inverter board itself
  • Main board communication circuit
✓ One safe check you can try

1. Turn the washer off and wait two to three minutes. 2. Turn it back on and start a short cycle. 3. Check that the drum is not jammed by a sock or a hard item between the drum and the tub. 4. If AC6 or AE6 returns, stop using the washer and schedule a visit.

! Why to stop there
  • A restart tells us nothing about whether the inverter or its connection is the weak point.
  • We inspect the harness and connectors between the two boards, then test the inverter's response.
  • You approve a written price before any inverter or control board is replaced.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

Cold / Eco WarmSamsung Washer Cold or Eco Warm Lights Blinking: Stuck Button Extra Large / Extra High / Large / High blinkingSamsung Washer Extra Large, Extra High, Large, or High Lights Blinking: Water Not Filling Hot & Cold / Hot & Eco WarmSamsung Washer Hot and Cold, or Hot and Eco Warm Lights Blinking: Motor Error Hot / Hot & Extra Large / Hot & Extra High / Hot & Large / Hot & HighSamsung Washer Hot, or Hot with a Level Light Lights Blinking: Door Not Locked Hot & Medium / Hot & MidSamsung Washer Hot and Medium, or Hot and Mid Lights Blinking: Heater Error Hot & Small / Hot & LowSamsung Washer Hot and Small, or Hot and Low Lights Blinking: Hoses Swapped Hot & Tap Cold / Hot & CoolSamsung Washer Hot and Tap Cold, or Hot and Cool Lights Blinking: MEMS Sensor Error Hot & WarmSamsung Washer Hot and Warm Lights Blinking: Unbalanced Load
AC6 / AE6AC6 / AE6 questions
Why won't the drum turn with AC6?

The inverter board powers the motor, and the main board cannot reach it. Without that link the control stops the cycle instead of driving the motor blindly.

Do AE6 and AC6 differ on this washer?

On these washers the two spellings mean the same inverter link problem. The display may show either one depending on the model. Telling us exactly what the display shows helps us prepare for the visit.

Will a restart fix it?

It may clear the code once, especially after a power dip. A repeat means the link or the inverter needs testing, and we do that before quoting any part.

Book a visit

Still seeing AC6 / AE6?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 561-5298