ME21DG6700SR
Samsung ME21DG6700SR Auto-Dimming Glass Repair
Most common issues on this model
- Cavity temperature sensor readings
- Heating when the light and tray still work
- Breaker trips and loud humming at start
- Auto-dimming touch panel response
The ME21DG6700SR is one of the Bespoke over-the-range models with 2.1 cu. ft. of space, an Auto Connect link to a range and auto-dimming glass touch controls, in fingerprint-resistant stainless steel. Its glass controls dim on their own, so the panel and its board are specific to this version.
If the oven reports a temperature sensor problem, we measure the sensor and its wiring before we replace anything. Cold food with a working light points to the heating circuit, and a loud hum with a tripped breaker means we test the high-voltage parts first. We also look at the glass panel, the cable and the board when touches go missing.
We read the complete model and serial from the label before ordering, and you get a written price first. Our work has a 30-day workmanship warranty.
Key features
- 2.1 cu. ft. capacity
- Bespoke over-the-range microwave
- Auto-dimming glass touch controls
- Auto Connect link to a range
- Fingerprint-resistant stainless steel finish
Error codes this model can show
What are auto-dimming glass touch controls?
They are the glass panel controls that dim on their own. If touches stop registering, we test the cable and the board, and the glass is replaced last.
The microwave reports a sensor problem. Do you replace the sensor first?
No. We measure the sensor and its wiring first. A loose connector or a damaged wire is cheaper to repair than a part, and we explain what we find.
Why does my microwave trip the breaker only when it starts?
The start-up surge is the highest draw, so a weak high-voltage part shows itself there. We test those parts with the power off before the oven is used again.
Book repair for your ME21DG6700SR
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.