Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Samsung specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 561-5298 Start a Repair
Error code · Dishwasher

Samsung Dishwasher Code bC2: Button Held 30 Seconds

On Samsung DW80R and DW80T series dishwashers, including the DW80T5040US, bC2 is a check code meaning a button was pressed and held for 30 seconds or longer. The control treats that as a stuck key instead…

Low risk · DIY check OK
Start a Repair(713) 561-5298
Code
bC2
Appliance
Dishwasher
Brand
Samsung
Warranty
30-day workmanship

What bC2 means

On Samsung DW80R and DW80T series dishwashers, including the DW80T5040US, bC2 is a check code meaning a button was pressed and held for 30 seconds or longer. The control treats that as a stuck key instead of a normal press. It is a diagnostic code that appears only on some units, often through a recall display. In daily use it points to a key that is sticking, wet or pressed down by something.

Common causes of bC2

  • A touch key reading pressed after you let go
  • Moisture or residue around the control panel
  • A key or membrane that has stopped releasing
✓ One safe check you can try

1. Turn the dishwasher off. 2. Wipe the control panel dry with a soft cloth. 3. Make sure nothing is leaning on the keys. 4. Turn the dishwasher on and press each key once. 5. If bC2 returns, call us.

! Why to stop there
  • If it comes back on a clean, dry panel, the key itself needs testing.
  • We check which key is reading pressed and whether the panel connection is sound.
  • Any repair is priced in writing ahead of time, with a 30-day warranty on our labor.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Dishwasher codes

SRSamsung Dishwasher Code SR: Water Not Draining Out 1E / IE (rotary models)Samsung Dishwasher Code 1E / IE on Rotary Models: Heater Overheating LC / LESamsung Dishwasher Code LC / LE: Leak Detected OC / 0C / oESamsung Dishwasher Code OC: Too Much Water PCSamsung Dishwasher Code PC: Zone Wash not Operating PESamsung Dishwasher Code PE: Half Load Error tESamsung Dishwasher Code tE: Temperature Sensor Blinking: Heavy (without Express 60) / NormalSamsung Dishwasher Heavy or Normal Light Blinking: Leak Detected
bC2bC2 questions
How is bC2 different from bC3?

bC2 is a button held down for 30 seconds or more. bC3 is a communication loss between the touch chip and the buttons. They sound alike, but we test them differently.

Can wet hands cause bC2?

Moisture on the panel can mimic a held key. Dry it thoroughly and restart before assuming a repair is needed. Dry the whole panel, including the edges where moisture hides.

Will I see bC2 on my screen?

Only some units display it. Others hold it as a stored check code that we can read. Our technician can read the code history and see which key was involved.

Book a visit

Still unsure about bC2?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 561-5298