Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Samsung specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 561-5298 Start a Repair
Error code · Washer

Samsung Washer Code HC / HE / Hr: Heater Circuit

Samsung washers with a digital display, front-load and top-load, show HC, HE, HE1, or Hr when the control reports a heater problem. Models such as the WF45M5500A and WD53DBA900H show HC and HC1. The service tables…

Medium · inspection needed
Start a Repair(713) 561-5298
Code
HC / HE / Hr
Appliance
Washer
Brand
Samsung
Warranty
30-day workmanship

What HC / HE / Hr means

Samsung washers with a digital display, front-load and top-load, show HC, HE, HE1, or Hr when the control reports a heater problem. Models such as the WF45M5500A and WD53DBA900H show HC and HC1. The service tables describe the washing heater as shorted, open, or giving a bad sensor reading, and overheat protection can also trip if the heater ran without enough water. The cycle stops with the code showing.

Common causes of HC / HE / Hr

  • Heater element and its wiring
  • Heater temperature sensor reading
  • Water level sensing during heating
  • Main board heater output
✓ One safe check you can try

1. Turn the washer off and wait a few minutes. 2. Turn it on and restart the cycle. 3. Check that the water supply valves are fully open so the tub can fill. 4. If HC or HE returns, schedule a visit and avoid running hot cycles.

! Why to stop there
  • A restart cannot tell us whether the heater, its sensor, or the water level reading is involved.
  • We test the heater and its sensor and check whether the tub fills fully before heating.
  • You see the written price before any heater or board is replaced.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

Hot / Hot & Extra Large / Hot & Extra High / Hot & Large / Hot & HighSamsung Washer Hot, or Hot with a Level Light Lights Blinking: Door Not Locked Hot & Medium / Hot & MidSamsung Washer Hot and Medium, or Hot and Mid Lights Blinking: Heater Error Hot & Small / Hot & LowSamsung Washer Hot and Small, or Hot and Low Lights Blinking: Hoses Swapped Hot & Tap Cold / Hot & CoolSamsung Washer Hot and Tap Cold, or Hot and Cool Lights Blinking: MEMS Sensor Error Hot & WarmSamsung Washer Hot and Warm Lights Blinking: Unbalanced Load Self Clean LED blinkingSamsung Washer Self Clean Light Lights Blinking: Cleaning Reminder Small / LowSamsung Washer Small or Low Lights Blinking: No Drain Tap Cold / Cool / Medium / MidSamsung Washer Tap Cold, Cool, Medium, or Mid Lights Blinking: Overflow
HC / HE / HrHC / HE / Hr questions
Does HC differ from HE?

Both belong to the heater error group, and HE1 and Hr are close variants. The exact characters on your display help us pick the right test.

Can low water cause a heater code?

Yes. If the heater runs without enough water, overheat protection can trip. Check that the supply valves are open and the water fills before starting again.

Can I wash cold while waiting for service?

The code stops the cycle, so the washer may not run at all. We can tell you more after checking the heater circuit. Leaving it idle until we look is safer than repeated attempts.

Book a visit

Still seeing HC / HE / Hr?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 561-5298