Model library · Samsung Dishwasher

DW60R2014

Samsung DW60R2014 Dishwasher Repair

Most common issues on this model

Overflow warning after a cycle
Drain pump stopping partway through a wash
Blinking lights on a model without a display
Leak-sensor warning at the start

The DW60R2014 is a current Samsung 24-inch built-in dishwasher with a front-control panel, an adjustable upper rack, a leak sensor in the base, and a rated sound level of 52 dBA. A front-control dishwasher keeps its buttons on the face of the door, which adds the panel to our checks.

On this dishwasher we begin with the water path. An overflow warning sends us to the fill valve and the float, while a pump that stops partway through a wash leads us to the filter and drain pump. If the lights blink without a display, we read the pattern before testing parts. We also look in the base for moisture that could trip the leak sensor. A rack that rides unevenly gets checked at the rollers and rails. We read the model and serial from the label before ordering any part, and you approve a written price before work starts.

Key features

24-inch built-in dishwasher
Front-control panel
Adjustable upper rack
Leak sensor in the base
52 dBA rated sound level

→Codes

Error codes this model can show

SRSamsung Dishwasher Code SR: Water Not Draining Out 1E / IE (rotary models)Samsung Dishwasher Code 1E / IE on Rotary Models: Heater Overheating OC / 0C / oESamsung Dishwasher Code OC: Too Much Water PCSamsung Dishwasher Code PC: Zone Wash not Operating PESamsung Dishwasher Code PE: Half Load Error tESamsung Dishwasher Code tE: Temperature Sensor Blinking: Heavy (without Express 60) / NormalSamsung Dishwasher Heavy or Normal Light Blinking: Leak Detected Blinking: Normal, Delicate + Quick / Normal, Delicate + Smart Auto / Normal, Quick+ + Smart Auto / Smart Auto, Normal + DelicateSamsung Dishwasher Normal Light Trio Blinking: Supply Water Too Hot

DW60R2014DW60R2014 questions

My DW60R2014 shows an overflow warning. What do you check?

We check the fill valve for a stuck-open seal, then the float and the drain path. Excess water in the base can also trip the warning, so we dry and inspect the area.

Why does the pump stop in the middle of a wash?

A clogged filter, a blocked drain, or a failing pump can stop it. We clean the filter, check the drain hose and air gap, and test the pump before suggesting a replacement.

Does a front-control panel change how you repair it?

It adds one more thing to check, since the panel is on the door face. If the buttons do not respond, we test the panel and its connection before looking at the main board.

Book a visit

Book repair for your DW60R2014

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 561-5298