Error code · Dryer

Samsung Dryer Code oD: Dry Time Error

oD appears on Samsung dryers with a digital display and is listed as a Dry Time Error. The dryer has reported a problem with the drying time it is working to, and the cycle stops. No…

Medium · inspection needed

Start a Repair (713) 561-5298

Code: oD
Appliance: Dryer
Brand: Samsung
Warranty: 30-day workmanship

What oD means

oD appears on Samsung dryers with a digital display and is listed as a Dry Time Error. The dryer has reported a problem with the drying time it is working to, and the cycle stops. No single model is tied to this listing, so we describe it by product type. You will see oD on the display, and the dryer may stop partway through a load or not start the cycle.

Common causes of oD

The control not tracking drying time correctly
A sensor that determines how dry the load is reading incorrectly
A power interruption that left the control in an error state

✓ One safe check you can try

1. Turn the dryer off. 2. Unplug it or switch off its breaker for 2 to 3 minutes. 3. Turn the power back on and restart the cycle. 4. Check the user manual for your model. 5. If oD returns, stop using the dryer.

! Why to stop there

The code gives the name of the problem but not the part behind it, so a clean restart does not tell us the cause is gone.
We check the dryness sensing and how the control handles the cycle timer.
You get a written price before we start, and the repair carries a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dryer codes

AE3 / AE4 / AE5 / E3Samsung Dryer Code AE3 / AE4 / AE5 / E3: Control Communication Error tE3 / tC5 / tCS / 1 tC / 1tC5 / 1tCSSamsung Dryer Code tE3 / tC5 / tCS / 1 tC / 1tC5 / 1tCS: Heat Sensor Reading 9E1Samsung Dryer Code 9E1: Supply Voltage Problem bC2 / 6E2 / 6C2Samsung Dryer Code bC2 / 6E2 / 6C2: Stuck Control Button d0 / 1 DC / 1 dFSamsung Dryer Code d0 / 1 DC / 1 dF: Door Not Registering Closed 1 HC / 1 FC / 1 ACSamsung Dryer Code 1 HC / 1 FC / 1 AC: Prefix Variants High or 40 min light blinkingSamsung Dryer High Light Blinking: Door Problem Low light blinkingSamsung Dryer Low Light Blinking: Jammed Button

oDoD questions

What does oD mean on a Samsung dryer?

oD is listed as a Dry Time Error. The dryer reported a problem with the drying time it is working to and stopped the cycle, so it will not finish the load until the error is cleared.

Is oD the same as a clogged vent?

No. A blocked vent shows up through the Vent Blockage results or through heating or temperature codes. oD points to the drying time side of the control.

Will turning the dryer off and on clear oD?

A power-off for 2 to 3 minutes is the right first step, and sometimes it is enough. If oD comes back, the control or its sensing needs to be tested.

Book a visit

Still seeing oD?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 561-5298