Error code · Dryer

Samsung Dryer Code 1 HC / 1 FC / 1 AC: Prefix Variants

These codes appear on Samsung dryers where the display adds a 1 and a space before the usual letters. Each is a variant of a more familiar error: 1 HC is a heating error variant, 1…

High · stop use, call now

Start a Repair (713) 561-5298

Code: 1 HC / 1 FC / 1 AC
Appliance: Dryer
Brand: Samsung
Warranty: 30-day workmanship

What 1 HC / 1 FC / 1 AC means

These codes appear on Samsung dryers where the display adds a 1 and a space before the usual letters. Each is a variant of a more familiar error: 1 HC is a heating error variant, 1 FC is a frequency error variant, and 1 AC is a communication variant. They tell us which circuit the dryer is reporting, but not which part inside it needs work. The dryer may stop, not heat, or not start at all.

Common causes of 1 HC / 1 FC / 1 AC

Heating circuit and its sensor for 1 HC
Frequency or motor control reading for 1 FC
Control board communication for 1 AC
Connectors between the boards

✓ One safe check you can try

1. Turn the dryer off, unplug it, and wait a few minutes. 2. Clean the lint screen and check the vent for blockage or kinks. 3. Plug the dryer back in and run a short cycle with a small load. 4. Write down exactly which of the three codes appears. 5. If it returns, stop using the dryer and tell us which one.

! Why to stop there

The letters tell us the circuit, not the part that needs work.
We read which code is on the display and test that circuit on the machine.
The price is given in writing before work begins, and the repair carries a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dryer codes

AE3 / AE4 / AE5 / E3Samsung Dryer Code AE3 / AE4 / AE5 / E3: Control Communication Error tE3 / tC5 / tCS / 1 tC / 1tC5 / 1tCSSamsung Dryer Code tE3 / tC5 / tCS / 1 tC / 1tC5 / 1tCS: Heat Sensor Reading 9E1Samsung Dryer Code 9E1: Supply Voltage Problem bC2 / 6E2 / 6C2Samsung Dryer Code bC2 / 6E2 / 6C2: Stuck Control Button d0 / 1 DC / 1 dFSamsung Dryer Code d0 / 1 DC / 1 dF: Door Not Registering Closed oDSamsung Dryer Code oD: Dry Time Error tS / tC / tE / tOSamsung Dryer Code tS / tE: Temperature Sensing CtSamsung Dryer Code Ct: Temperature Out of Range

1 HC / 1 FC / 1 AC1 HC / 1 FC / 1 AC questions

What does the 1 in front of HC mean?

On these Samsung dryers it is a variant of the heating code. The display shows the 1 and a space, and we match it to the circuit it points to.

Do 1 HC, 1 FC and 1 AC need the same repair?

No. They point to different circuits, namely heating, frequency and communication, so each one is checked separately on the machine and nothing is assumed from the others.

Can I run the dryer with one of these codes?

We would not. Stop using it until we have checked the circuit, especially if the code comes with a heating problem or the dryer will not start at all.

Book a visit

Still seeing 1 HC / 1 FC / 1 AC?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 561-5298