DW80K5050U
Samsung DW80K5050U Dishwasher Repair
Most common issues on this model
- Jets and filter after a poor wash
- Top buttons and display
- Drain pump behavior
- Latch and fill valve
The DW80K5050U is a Samsung StormWash dishwasher with top controls in stainless steel. The number is a family form of the DW80K5050US code that appears on the label.
Most of the calls we get for this type of unit involve either a wash that no longer reaches the baked-on dishes or a cycle that stops before the end. Both tend to start in the filter or the jets, so we open the sump first and check the spray before we look at the control.
After that, we test the drain pump, the latch and the fill valve during a cycle. We read the model and serial from the label before we order parts. A written price comes first, and the repair is covered by a 30-day workmanship warranty.
Key features
- Top control layout with StormWash cleaning
- Stainless steel exterior
- Label code DW80K5050US
Error codes this model can show
Why is the DW80K5050U shorter than the label code?
It is a family form that leaves off the final letter. The label code, DW80K5050US, is the one we use for parts, and we read it on site before we place an order so the version is certain.
Baked-on food stays on my dishes. What is the cause?
The StormWash jets may be blocked or the pump may be weak, and a clogged filter lowers the pressure further. We clean the jets and the filter, then test the pump during a wash stage to see if pressure is normal.
The dishwasher stops mid-cycle. What do you check?
We check the door switch, the water level and the pump. Where the cycle stops tells us which one to test, so we run it once and note the stage and the time before we open the unit.
Book repair for your DW80K5050U
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.