Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Samsung specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 561-5298 Start a Repair
Error code · Microwave

Samsung Microwave Code E-62: Humidity Sensor Shorted

When a Samsung US microwave shows E-62, the control has found the humidity sensor circuit shorted. This is the reverse of E-61: instead of a break, the circuit looks bridged and gives a reading no real…

Medium · inspection needed
Start a Repair(713) 561-5298
Code
E-62
Appliance
Microwave
Brand
Samsung
Warranty
30-day workmanship

What E-62 means

When a Samsung US microwave shows E-62, the control has found the humidity sensor circuit shorted. This is the reverse of E-61: instead of a break, the circuit looks bridged and gives a reading no real cavity could produce. Programs that rely on humidity stop, and the display keeps the code until the oven is reset. Nothing you cooked or spilled needs to have caused it.

Common causes of E-62

  • The humidity sensor circuit shorting at the sensor or its wiring
  • Moisture bridging the sensor connection
  • Damaged insulation on the sensor wires
✓ One safe check you can try

1. Switch the breaker off or unplug the microwave. 2. Wet parts need time to dry before you carry on. 3. Give it 60 seconds, then restore power. 4. Run a short timed cook as a test with a cup of water. 5. Watch the display during the first minute for the code. 6. Request service if E-62 returns.

! Why to stop there
  • A short may sit anywhere along the circuit, so we test each stretch.
  • We also compare with the open case on E-61, because the two point to different problems in the wiring.
  • We tell you the price in writing first.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Microwave codes

E-X2Samsung Microwave Code E-X2: Extra Short Error -SE-Samsung Microwave Code -SE-: Key Short Error TESamsung Microwave Code TE: Touch Panel Communication E-52Samsung Microwave Code E-52: Memory Circuit Shorted E-53Samsung Microwave Code E-53: Memory Read or Write Failed E-54Samsung Microwave Code E-54: Zero Reading E-61Samsung Microwave Code E-61: Humidity Sensor Open E-63Samsung Microwave Code E-63: Humidity Sensor Timed Out
E-62E-62 questions
What is different from E-61?

E-61 is a break in the humidity sensor circuit and E-62 is a short. We handle them differently, even though your first steps are the same.

Can steam cause a short reading?

Heavy steam or a spill near the sensor can bridge its contacts and look like a short. If the code clears after drying and stays away, that was likely the cause.

Is it okay to run timed cooking?

Usually yes. Timed cooking does not need the humidity sensor, so use it if the oven runs normally, and skip the humidity programs until the circuit has been checked.

Book a visit

Still seeing E-62?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 561-5298