Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Samsung specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 561-5298 Start a Repair
Error code · Dishwasher

Samsung Dishwasher Code HC: Tub Too Hot

On Samsung US dishwashers with a digital display, HC reports a high temperature heater error: the temperature inside the dishwasher is too hot. On the DW80T5040US the control reaches that conclusion when it reads 80 C…

High · stop use, call now
Start a Repair(713) 561-5298
Code
HC
Appliance
Dishwasher
Brand
Samsung
Warranty
30-day workmanship

What HC means

On Samsung US dishwashers with a digital display, HC reports a high temperature heater error: the temperature inside the dishwasher is too hot. On the DW80T5040US the control reaches that conclusion when it reads 80 C or higher for 3 seconds. The control stops the cycle and shows HC. You may feel heat from the door, and dishes can come out too hot to handle or the cycle may end early.

Common causes of HC

  • The temperature reading inside the tub
  • The heater staying on when it should switch off
  • Whether the code returns after a cool-down
  • Water level too low during heating
✓ One safe check you can try

1. Switch the breaker off for 30 seconds, then back on. 2. Empty the dishwasher and let it cool. 3. Make sure the detergent drawer is filled. 4. Run a Normal cycle. 5. If HC returns, stop using the dishwasher and call us.

! Why to stop there
  • A cool-down does not show whether the heater stays on or the temperature reading is wrong.
  • We test the heating circuit and the sensing together.
  • You see the price in writing before work, and the repair is warranted for 30 days.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Dishwasher codes

SRSamsung Dishwasher Code SR: Water Not Draining Out 1E / IE (rotary models)Samsung Dishwasher Code 1E / IE on Rotary Models: Heater Overheating Blinking: Heavy (without Express 60) / NormalSamsung Dishwasher Heavy or Normal Light Blinking: Leak Detected Blinking: Normal, Delicate + Quick / Normal, Delicate + Smart Auto / Normal, Quick+ + Smart Auto / Smart Auto, Normal + DelicateSamsung Dishwasher Normal Light Trio Blinking: Supply Water Too Hot Blinking: Normal + HeavySamsung Dishwasher Normal and Heavy Lights Blinking: Thermistor Reading Blinking: Normal, Heavy + Express 60Samsung Dishwasher Normal, Heavy and Express 60 Blinking: Thermistor Short Blinking: Normal, Heavy + Quick / Normal, Heavy + Smart AutoSamsung Dishwasher Normal, Heavy and Quick Lights Blinking: Low Water LC / LESamsung Dishwasher Code LC / LE: Leak Detected
HCHC questions
Is HC dangerous?

An overheating tub deserves respect, so stop the cycle and let it cool. The control shuts the cycle down to protect the machine and your dishes.

What separates HC from HE?

HC says the temperature is too high. HE says the temperature is being read incorrectly. We test the sensing and the heater for both. Both look similar on the panel, but they point to different readings.

Can I reset it myself?

A 30-second breaker reset is worth one try. If HC comes straight back, do not keep running it. Let the tub cool first, and never open the door mid-cycle to feel the heat.

Book a visit

Still seeing HC?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 561-5298