DV42H5200G
Samsung DV5200 DV42H5200G 7.5 cu. ft. Gas Dryer Repair
Most common issues on this model
- Igniter and gas valve coils when the dryer runs but gives no heat
- Flame sensor and burner assembly
- Exhaust vent and lint buildup
- Drum belt and rollers
The DV42H5200G is part of the DV5200 series: a 7.5 cu. ft. gas dryer, listed as the DV42H5200GP. It is an older model that is still working in many Houston homes with a gas line behind the laundry area.
On a gas dryer, no heat usually means the ignition sequence is not completing. We check the igniter, the valve coils and the flame sensor, and we look at the gas connection and shutoff. A restricted vent matters here too, because it can shut the burner down early. Drum noise sends us to the belt and rollers. We confirm the model and serial from the label before ordering parts, and we give a written price before starting.
Key features
- DV5200 series
- 7.5 cu. ft. capacity
- Gas dryer
- Variant DV42H5200GP
Error codes this model can show
My gas dryer spins but stays cold. What is the cause?
The igniter or valve coils are the usual suspects on gas dryers of this type, with the flame sensor next. We test each one in order before replacing anything.
Can you work on the gas connection?
We check the shutoff, the flex line and the burner area for safe operation. We tell you what we find and quote any work in writing before we begin.
Why does the dryer shut off before clothes are dry?
A blocked vent can overheat the unit and cycle the burner off. We measure the vent airflow before replacing parts, since clearing the vent often solves it.
Book repair for your DV42H5200G
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.