Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Samsung specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 561-5298 Start a Repair
Model library · Samsung Dishwasher

DW50T6060

Samsung DW50T6060 Dishwasher Repair

Start a Repair(713) 561-5298

Most common issues on this model

  1. Slow fill leading to a water-level warning
  2. Leak-sensor warning at the start of a cycle
  3. Blinking lights on a model without a display
  4. Door that does not open at the end of the cycle

The DW50T6060 is a current Samsung 24-inch built-in dishwasher in fingerprint-resistant stainless steel, rated at 46 dBA. Its AutoRelease door opens slightly at the end of the cycle to let steam out and help dishes dry. It is installed under a counter with a water supply, drain hose, and a power connection behind the toe kick.

This model has no display, so it talks to you in blinking lights, and we read those patterns on arrival. A slow fill sends us to the inlet valve and the supply line. A leak-sensor warning at the start makes us check the base for water and the sensor itself. If the AutoRelease door does not open at the end of a cycle, we look at the release mechanism and the door latch. A quiet unit also hides small noises, so a new rattle or hum gets checked at the pump. We read the model and serial from the label first, and you see a written price before we repair anything.

Key features

  • 24-inch built-in dishwasher
  • AutoRelease door that opens at the end of the cycle for drying
  • Fingerprint-resistant stainless steel finish
  • 46 dBA rated sound level
→Codes

Error codes this model can show

SRSamsung Dishwasher Code SR: Water Not Draining Out 1E / IE (rotary models)Samsung Dishwasher Code 1E / IE on Rotary Models: Heater Overheating tESamsung Dishwasher Code tE: Temperature Sensor Blinking: Heavy (without Express 60) / NormalSamsung Dishwasher Heavy or Normal Light Blinking: Leak Detected Blinking: Normal, Delicate + Quick / Normal, Delicate + Smart Auto / Normal, Quick+ + Smart Auto / Smart Auto, Normal + DelicateSamsung Dishwasher Normal Light Trio Blinking: Supply Water Too Hot Blinking: Normal + HeavySamsung Dishwasher Normal and Heavy Lights Blinking: Thermistor Reading Blinking: Normal, Heavy + Express 60Samsung Dishwasher Normal, Heavy and Express 60 Blinking: Thermistor Short Blinking: Normal, Heavy + Quick / Normal, Heavy + Smart AutoSamsung Dishwasher Normal, Heavy and Quick Lights Blinking: Low Water
DW50T6060DW50T6060 questions
The lights blink on my DW50T6060. What does that mean?

With no display, the lights blink in a pattern to signal a problem. We read the pattern when we arrive, then test the matching part, such as the inlet valve, drain, or leak sensor.

Why did the door not open at the end of the cycle?

The AutoRelease mechanism or the door latch may not be releasing. We check the release and the latch, and make sure the door and gasket are not blocked.

The dishwasher says it is leaking but I see no water. Why?

The sensor in the base can trip from a little moisture, even condensation. We dry and inspect the base, test the sensor, and look at the hoses and door seal for leaks.

Book a visit

Book repair for your DW50T6060

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 561-5298