Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Samsung specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 561-5298 Start a Repair
Error code · Washer-Dryer Combo

Samsung Laundry Combo Code BC2: A Button Reads As Pressed

This code shows on the Samsung WD90F27 series and WD90F53AVS Laundry Combo. BC2 means the control senses an incorrect button state, with a button still pressed in. The unit thinks a key is being held down,…

Low risk · DIY check OK
Start a Repair(713) 561-5298
Code
BC2
Appliance
Washer-Dryer Combo
Brand
Samsung
Warranty
30-day workmanship

What BC2 means

This code shows on the Samsung WD90F27 series and WD90F53AVS Laundry Combo. BC2 means the control senses an incorrect button state, with a button still pressed in. The unit thinks a key is being held down, so the controls may ignore your input or the cycle will not start. The display shows BC2 even when nothing is touching the panel.

Common causes of BC2

  • Button held down by dirt, residue or a cleaning cloth
  • Panel overlay swollen by moisture
  • Control board reading a key incorrectly
✓ One safe check you can try

1. Turn the unit off. 2. Look at the control panel and wipe it with a dry, soft cloth, making sure no button is stuck in. 3. Keep sprays and wet cloths away from the panel. 4. Wait two to three minutes and turn the unit on again. 5. Do not press several buttons at once while it powers up.

! Why to stop there
  • If BC2 comes back, we cannot tell from the display whether the button, its pad or the board is reading wrongly.
  • We test each control position for a stuck reading before recommending a part.
  • If a part is needed we quote it in writing first, and the repair is under a 30-day workmanship warranty.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer-Dryer Combo codes

DC1Samsung Laundry Combo Code DC1: Door Lock and Unlock UBSamsung Laundry Combo Code UB: Load Out of Balance dC2Samsung Laundry Combo Code dC2: Door Pulled While Locked UB1Samsung Laundry Combo Code UB1: Waterproof Items in the Drum DC5Samsung Laundry Combo Code DC5: Auto-open Door Did not Open ULCSamsung Laundry Combo Code ULC: Foam During Dehumidification DC6Samsung Laundry Combo Code DC6: Auto Open Door and SmartThings HCSamsung Laundry Combo Code HC: Heater Error or Hot Compressor
BC2BC2 questions
Why does BC2 appear when I am not pressing anything?

A button may be held in by residue or a swollen panel overlay, so the control reads it as pressed. Cleaning around the buttons sometimes releases it.

Is it safe to wipe the panel?

Yes, with the unit off and a dry or barely damp soft cloth. Do not spray liquid on the panel, because moisture can cause more control problems.

Will the unit work normally after the code clears?

Usually yes. If BC2 keeps coming back, the button pad or board needs a check by us. A quick wipe and a calm restart is a fair first try, and nothing about it risks the unit.

Book a visit

Still unsure about BC2?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 561-5298