Error code · Dryer

Samsung Dryer Code 9C1 / 9E / 2E: Supply Voltage

High · stop use, call now

Code: 9C1 / 9E / 2E
Appliance: Dryer
Brand: Samsung
Warranty: 30-day workmanship

What 9C1 / 9E / 2E means

On Samsung dryers with a digital display, including the DV45H series that shows 9E1 for over voltage, these codes report an abnormal voltage supplied to the dryer. The dryer stops and shows the code until the supply is right. On a stacked washer and dryer with a multi-control kit, the washer can report a dryer 9C1 if the dryer is operated within 5 seconds of switching the washer on. A SmartThings update corrects that case.

Common causes of 9C1 / 9E / 2E

A dryer sharing its circuit or fed through an extension cord
A power cord installed incorrectly on an electric dryer
A supply voltage that does not match what the dryer is built for
A stacked pair where the washer controls the dryer too soon after power-up

✓ One safe check you can try

1. Plug the dryer straight into its own outlet, with no extension cord and no other large appliance on that circuit. 2. On an electric dryer, check that the power cord is installed correctly and that the home supplies the right voltage. 3. On a stacked pair, wait longer after turning the washer on before touching the dryer controls. 4. A dryer taken from another country can show this code for good reason. 5. Restart the dryer. If the code returns, stop using it.

! Why to stop there

If the house supply is the issue, it needs an electrician, and we can tell you whether it is the house or the dryer.
We measure the voltage reaching the dryer and inspect the cord connection at the terminal block.
On a stacked pair, we check the control kit and its software before replacing anything.
We quote in writing before work and give a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dryer codes

AE3 / AE4 / AE5 / E3Samsung Dryer Code AE3 / AE4 / AE5 / E3: Control Communication Error tE3 / tC5 / tCS / 1 tC / 1tC5 / 1tCSSamsung Dryer Code tE3 / tC5 / tCS / 1 tC / 1tC5 / 1tCS: Heat Sensor Reading 9E1Samsung Dryer Code 9E1: Supply Voltage Problem bC2 / 6E2 / 6C2Samsung Dryer Code bC2 / 6E2 / 6C2: Stuck Control Button d0 / 1 DC / 1 dFSamsung Dryer Code d0 / 1 DC / 1 dF: Door Not Registering Closed 1 HC / 1 FC / 1 ACSamsung Dryer Code 1 HC / 1 FC / 1 AC: Prefix Variants oDSamsung Dryer Code oD: Dry Time Error tS / tC / tE / tOSamsung Dryer Code tS / tE: Temperature Sensing

9C1 / 9E / 2E9C1 / 9E / 2E questions

What is the difference between 9C1, 9E, and 2E?

They are listed together as voltage errors. The DV45H series calls 9E1 an over-voltage condition. On the screen they all mean the dryer sees a supply it should not run on.

Why does my stacked dryer show 9C1 when I only started the washer?

With a multi-control kit, using the dryer controls within 5 seconds of powering on the washer can cause the washer to report 9C1 for the dryer. A SmartThings update addresses it.

Is it safe to keep using the dryer?

Not while the code is showing. A supply outside the dryer's range can damage the heater and control. Correct the cord, outlet, or circuit first, and call us if the code stays.

Book a visit

Still seeing 9C1 / 9E / 2E?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 561-5298