Error code · Dishwasher

Samsung Dishwasher Code AP: Wi-Fi Setup Mode

AP on a Samsung US dishwasher with a digital display and Wi-Fi is not an error. It stands for Access Point mode, which the dishwasher enters to help you connect it to a mobile device. The…

Low risk · DIY check OK

Start a Repair (713) 561-5298

Code: AP
Appliance: Dishwasher
Brand: Samsung
Warranty: 30-day workmanship

What AP means

AP on a Samsung US dishwasher with a digital display and Wi-Fi is not an error. It stands for Access Point mode, which the dishwasher enters to help you connect it to a mobile device. The display shows AP while it waits for the phone to join. This is a brand-wide message on connected models. If you did not mean to start pairing, you may have pressed the Wi-Fi or Smart Control key, and AP simply shows the setup is open.

Common causes of AP

A Wi-Fi or Smart Control key pressed on purpose or by accident
Pairing with the phone not finished
Home Wi-Fi signal or password entered wrong during setup

✓ One safe check you can try

1. Keep the phone near the dishwasher and finish the connection in the app. 2. If you did not mean to pair, leave it alone and let the display return to normal. 3. If it will not connect, turn the dishwasher off and on and try again. 4. Check that your home Wi-Fi is working and the password is correct. 5. If AP stays on with no keys pressed, call us.

! Why to stop there

If the dishwasher keeps going back to AP, the Wi-Fi module or control may be involved.
We check whether the keypad is registering presses you did not make.
If a repair is needed, it is quoted in writing first and covered for 30 days.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dishwasher codes

SRSamsung Dishwasher Code SR: Water Not Draining Out 1E / IE (rotary models)Samsung Dishwasher Code 1E / IE on Rotary Models: Heater Overheating Blinking: Heavy (without Express 60) / NormalSamsung Dishwasher Heavy or Normal Light Blinking: Leak Detected Blinking: Normal, Delicate + Quick / Normal, Delicate + Smart Auto / Normal, Quick+ + Smart Auto / Smart Auto, Normal + DelicateSamsung Dishwasher Normal Light Trio Blinking: Supply Water Too Hot Blinking: Normal + HeavySamsung Dishwasher Normal and Heavy Lights Blinking: Thermistor Reading Blinking: Normal, Heavy + Express 60Samsung Dishwasher Normal, Heavy and Express 60 Blinking: Thermistor Short Blinking: Normal, Heavy + Quick / Normal, Heavy + Smart AutoSamsung Dishwasher Normal, Heavy and Quick Lights Blinking: Low Water LC / LESamsung Dishwasher Code LC / LE: Leak Detected

APAP questions

Is AP a problem with my dishwasher?

No. It means the dishwasher is waiting to be connected to your phone. Finish the app setup or let it time out and you are back to normal use.

Why will it not connect?

Usually the home Wi-Fi password or signal is the cause. Turning the dishwasher off and on and trying again often helps. If not, the router settings are worth checking.

Does AP stop my dishwasher from washing?

It should not. If the cycle will not run while AP stays up, tell us, because then the control needs a closer look. Most often the display simply returns to normal after pairing or a restart.

Book a visit

Still unsure about AP?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 561-5298