Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Samsung specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 561-5298 Start a Repair
Model library · Samsung Dishwasher

DW80DG5500SR

Samsung DW80DG5500SR Stainless Repair

Start a Repair(713) 561-5298

Most common issues on this model

  1. Latch and switch when the cycle will not start
  2. Water left in the tub and the pump behind it
  3. Fill valve if the tub fills slowly
  4. Spray arms and dispenser flap for dirty dishes

The DW80DG5500SR is a Samsung dishwasher in the stainless steel finish, as the SR ending shows. It shares a platform with the DW80DG5200 number, and we do not state a capacity or sound rating because none is confirmed for this entry.

The correct base for this number is DW80DG5500SR, and some labels run extra characters together after it. We read those carefully so the order goes in with the right panel and board. A unit like this is typically built into a cabinet run, reached from the front through the lower panel.

A visit starts with the door latch and the drain path. We then check the fill valve, the spray arms and the dispenser during a test cycle. Our price is written and agreed before work begins, and a 30-day workmanship warranty covers it. We always confirm the model and serial from the label before we order parts.

Key features

  • Samsung dishwasher in stainless steel (SR ending)
  • Listed with the DW80DG5200
  • Base number DW80DG5500SR
→Codes

Error codes this model can show

SRSamsung Dishwasher Code SR: Water Not Draining Out 1E / IE (rotary models)Samsung Dishwasher Code 1E / IE on Rotary Models: Heater Overheating LC / LESamsung Dishwasher Code LC / LE: Leak Detected OC / 0C / oESamsung Dishwasher Code OC: Too Much Water PCSamsung Dishwasher Code PC: Zone Wash not Operating PESamsung Dishwasher Code PE: Half Load Error tESamsung Dishwasher Code tE: Temperature Sensor Blinking: Heavy (without Express 60) / NormalSamsung Dishwasher Heavy or Normal Light Blinking: Leak Detected
DW80DG5500SRDW80DG5500SR questions
There are extra characters after the model on my label. Which do you use?

We use the base number and its finish ending, then record the rest for parts ordering. Reading the full label avoids the wrong door panel or board.

The dispenser does not open during the wash. Can you fix that?

Yes. We check the dispenser latch, its actuator and the wash timing. A stuck flap leaves detergent in the door, and replacing the small part usually solves it.

Will you need to remove the dishwasher to repair the drain?

Not always. The filter and pump are reached through the lower panel. We pull the unit only when the drain hose or the supply line behind it has to be replaced.

Book a visit

Book repair for your DW80DG5500SR

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 561-5298