Error code · Dishwasher

Samsung Dishwasher Normal, Heavy and Express 60 Blinking: Thermistor Short

Medium · inspection needed

Code: Blinking: Normal, Heavy + Express 60
Appliance: Dishwasher
Brand: Samsung
Warranty: 30-day workmanship

What Blinking: Normal, Heavy + Express 60 means

On Samsung dishwashers without a digital display, Normal, Heavy and Express 60 blinking together mean the thermistor is short-circuited. The thermistor is the temperature sensor, and a short makes it send a reading that cannot be real. The lights can be named differently on your model. The control stops the cycle because it cannot judge how warm the water is. Dishes may come out cool, or the cycle may end early.

Common causes of Blinking: Normal, Heavy + Express 60

Thermistor shorted internally
Wiring or connector shorted at the sensor
Whether the blinking comes back after a reset

✓ One safe check you can try

1. Turn the dishwasher off and switch the breaker off for 30 seconds. 2. Switch it back on. 3. Empty the dishwasher and fill the detergent drawer. 4. Run a Normal cycle. 5. If the lights blink again, leave it off and call us. Mention the three lights you saw blinking.

! Why to stop there

A reset cannot tell us whether the sensor or its wiring is shorted.
We test the sensor and its connection before replacing a part.
Any repair is priced in writing in advance and covered by our 30-day warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dishwasher codes

SRSamsung Dishwasher Code SR: Water Not Draining Out 1E / IE (rotary models)Samsung Dishwasher Code 1E / IE on Rotary Models: Heater Overheating OC / 0C / oESamsung Dishwasher Code OC: Too Much Water PCSamsung Dishwasher Code PC: Zone Wash not Operating PESamsung Dishwasher Code PE: Half Load Error tESamsung Dishwasher Code tE: Temperature Sensor Blinking: Heavy (without Express 60) / NormalSamsung Dishwasher Heavy or Normal Light Blinking: Leak Detected Blinking: Normal, Delicate + Quick / Normal, Delicate + Smart Auto / Normal, Quick+ + Smart Auto / Smart Auto, Normal + DelicateSamsung Dishwasher Normal Light Trio Blinking: Supply Water Too Hot

Blinking: Normal, Heavy + Express 60Blinking: Normal, Heavy + Express 60 questions

What does short-circuited mean for the sensor?

The sensor is passing signal in a way it should not, so the reading is meaningless. We test it directly. Because of that, the control stops rather than guess the temperature.

Is this the same as Normal plus Heavy alone?

No. That pair says the thermistor is not operating correctly. Adding Express 60 points to a short. We confirm which one applies by testing the sensor, not by the lights alone.

Should I try again?

One reset is fine. If the lights return, do not keep running it. Repeated tries will not clear a real short in the sensor. It saves both water and time while we get to the cause.

Book a visit

Still seeing Blinking: Normal, Heavy + Express 60?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 561-5298