Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Samsung specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 561-5298 Start a Repair
Error code · Dryer

Samsung Dryer Code C1 / CL1: Laundry in Drum

C1 or CL1 shows on Samsung dryers with a digital display and a Vent Blockage test. It means the dryer detected laundry inside the drum when the test was started, and the test cannot run with…

Low risk · DIY check OK
Start a Repair(713) 561-5298
Code
C1 / CL1
Appliance
Dryer
Brand
Samsung
Warranty
30-day workmanship

What C1 / CL1 means

C1 or CL1 shows on Samsung dryers with a digital display and a Vent Blockage test. It means the dryer detected laundry inside the drum when the test was started, and the test cannot run with clothes in it. The dryer is not broken in that case. Take the laundry out and try the test again. If the code appears with the drum empty, the dryer needs attention.

Common causes of C1 / CL1

  • Laundry or an item left in the drum when the test was started
  • A sensor reporting load with nothing in the drum
  • A previous load remaining where it cannot be seen
✓ One safe check you can try

1. Open the door and remove everything from the drum, including small items stuck to the wall. 2. Close the door and start the Vent Blockage test again. 3. Check around the door seal and the lint screen area for anything left behind. 4. If the code shows with the drum empty, stop and have it checked.

! Why to stop there
  • If the code appears with an empty drum, the sensor or its reading is the question, and a clean drum does not answer it.
  • We check what the dryer reads as load when the drum is empty.
  • You receive a written price before we start, and our work carries a 30-day warranty.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Dryer codes

AE3 / AE4 / AE5 / E3Samsung Dryer Code AE3 / AE4 / AE5 / E3: Control Communication Error tE3 / tC5 / tCS / 1 tC / 1tC5 / 1tCSSamsung Dryer Code tE3 / tC5 / tCS / 1 tC / 1tC5 / 1tCS: Heat Sensor Reading 9E1Samsung Dryer Code 9E1: Supply Voltage Problem bC2 / 6E2 / 6C2Samsung Dryer Code bC2 / 6E2 / 6C2: Stuck Control Button d0 / 1 DC / 1 dFSamsung Dryer Code d0 / 1 DC / 1 dF: Door Not Registering Closed 1 HC / 1 FC / 1 ACSamsung Dryer Code 1 HC / 1 FC / 1 AC: Prefix Variants Medium light blinkingSamsung Dryer Medium Light Blinking: Communication Loss oDSamsung Dryer Code oD: Dry Time Error
C1 / CL1C1 / CL1 questions
What is the difference between C1 and CL1?

Both mean the dryer found laundry in the drum during the Vent Blockage test. CL1 is not the same as CL, which is the Child Lock indicator.

Do I need a repair when C1 shows?

Usually not. If you remove the laundry and the test runs, the dryer is doing what it should. A repair is only needed if the code returns with the drum empty.

What is the Vent Blockage test?

It is a function on some Samsung dryers that checks how restricted the vent is. It needs an empty drum to read correctly, which is why laundry stops it.

Book a visit

Still unsure about C1 / CL1?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 561-5298