ME17F7021
Samsung ME17F7021 Matte Black Repair
Most common issues on this model
- Turntable motor, coupler and roller ring
- Fan that starts on its own over a hot cooktop
- Temperature sensor in the cavity
- Hood fan filters and the duct connection
Finished in matte black steel, the ME17F7021 is an over-the-range microwave with 1.7 cu. ft. of capacity. It is mounted above a range and doubles as a vent hood, which makes it a fit for kitchens that want a dark finish without a separate hood.
We begin with the tray drive when it stops turning, because the coupler and roller ring wear before the motor does. If the fan starts by itself above a hot cooktop, it may be doing its job on heat, and we check the sensor to be sure. When the oven stops heating or reports a temperature sensor problem, we measure the sensor circuit and the wiring to it.
Matte black panels are not interchangeable with stainless ones, so we confirm the complete model and serial from the label before ordering anything. You approve a written price first, and repairs are covered for 30 days.
Key features
- 1.7 cu. ft. capacity
- Over-the-range microwave
- Fingerprint-resistant matte black steel finish
Error codes this model can show
Why does the fan on my microwave start when the stove is hot?
Over-the-range units of this type sense rising heat and turn the fan on to protect the control board. We check the sensor and the settings to confirm it is working as designed.
My turntable does not rotate. What do you replace first?
We look at the coupler under the glass tray and the roller ring first. If both are in good shape, we test the motor and its wiring before replacing anything.
Do you repair the matte black ME17F7021 differently?
Mechanically it is the same work as other units of this type. The difference is in finish-specific panels and trim, so we match those parts to the label.
Book repair for your ME17F7021
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.