Samsung Laundry Combo Code TCH: Humidity Sensor Reading
On the Samsung WD53DBA900H-series Bespoke AI Laundry Combo, such as the WD53DBA900HZA1, TCH means the resistance of the temperature and humidity sensor on the left of the panel is too low or too high. The unit…
- Code
- TCH
- Appliance
- Washer-Dryer Combo
- Brand
- Samsung
- Warranty
- 30-day workmanship
What TCH means
On the Samsung WD53DBA900H-series Bespoke AI Laundry Combo, such as the WD53DBA900HZA1, TCH means the resistance of the temperature and humidity sensor on the left of the panel is too low or too high. The unit uses that sensor during drying to judge the air. You will see TCH on the display and the drying function may stop or run poorly.
Common causes of TCH
- Temperature and humidity sensor itself
- Connector or wiring at the sensor
- Moisture or residue near the sensor
- Main board input
1. Turn the unit off. 2. Wipe around the left side of the panel with a dry cloth, with no spray. 3. Make sure the room is not extremely humid or cold. 4. Do not open the panel to reach the sensor. 5. Try a drying cycle and call us if TCH comes back.
- From the display we cannot say whether the sensor, its wiring or the main board reads wrongly.
- We test the sensor reading and its connection before recommending a part.
- We agree on the written price before the work, and our repair is covered for 30 days.
Other Washer-Dryer Combo codes
Where is the TCH sensor?
It is on the left of the control panel, inside the unit, so you do not need to touch it. We reach it safely when we diagnose the code.
Does room humidity matter?
A very damp or cold room can influence readings, but it rarely causes a steady code. If TCH repeats, we test the sensor. Normal room conditions in a laundry closet are fine, so we look to the sensor first.
Can I still wash?
Often yes, since the sensor serves drying. We suggest avoiding drying until we check it. Washing does not rely on that sensor, so you can finish wet laundry on a rack or line while the unit waits for us.
Still seeing TCH?
A technician diagnoses it on site and gives you the price in writing before any work starts.