ME21DG6300SR
Samsung ME21DG6300SR Stainless Microwave Repair
Most common issues on this model
- Loud hum followed by a tripped breaker
- Display that stays on with a dead keypad
- Cooktop light and its socket
- Hood fan and filters
Owners of the ME21DG6300SR have a 2.1 cu. ft. over-the-range microwave with Wi-Fi in fingerprint-resistant stainless steel. It mounts under a cabinet over a range, so the lamp and fan below it are part of what we look at.
A loud hum followed by a tripped breaker is a reason to stop using the oven. We test the high-voltage parts and the supply before power goes back on. When the display lights but the keypad is dead, we trace the touch panel, its cable and the board. A cooktop light that has gone dark gets the socket and the supply checked, not only a new bulb.
Stainless trim and door parts are matched to the label, so we read the full model and serial before ordering. The price is written down before we start, and our repair warranty is 30 days.
Key features
- 2.1 cu. ft. capacity
- Over-the-range microwave with Wi-Fi
- Fingerprint-resistant stainless steel finish
Error codes this model can show
My microwave hums and then trips the breaker. What should I do?
Unplug it or switch off its breaker and leave it off. A shorted high-voltage part is a common cause, and we test those parts with power off before the oven runs again.
The display works but I cannot press anything. Can that be repaired?
Usually, yes. We test the touch panel, the ribbon cable and the control board in order, and we tell you which part needs replacing before you approve a price.
Is a 2.1 cu. ft. over-the-range model hard to remove?
It is heavy, so we come with a second person. Many checks happen in place, and the unit comes down only when the board or a heater needs work.
Book repair for your ME21DG6300SR
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.